SKU IP65/60/3528
https://d28uttb4jsd59b.cloudfront.net/media/catalog/product/cache/1/small_image/3b68ff6e713a3030be52986c4dd5eba1/d/f/dfvdfdsf.jpg
https://d28uttb4jsd59b.cloudfront.net/media/catalog/product/cache/1/image/410c00c14b78943cc706ae1a00b3ec42/d/f/dfvdfdsf.jpg
50W
Replacement

More Views

LED Strip – 60 x 3528 SMD LED Chips Per Metre - Silicone Waterproof – 2.5m Roll

Be the first to review this product

Print as PDF
900 Lumens 50W Replacement YES Dimmable 12W Wattage 180° Beam Angle

Uses 90% less energy


Lasts up to 30 years


5 Years Warranty

£ 14.50
14.5
GBP
http://schema.org/InStock

Price Inc. VAT

RRP £29.99 You save £12.91 (52%)

Select your bulb type below:

Warm White is similar to conventional lighting and has a softer feel. - Perfect for areas such as living rooms and bedrooms.

Cool White is a brighter, whiter light. - More suited for the Bathroom and Kitchen

Multi Colour - RGB £14.50

* Required Fields

Only 16 left

Product Name Qty
16
Bulk Buy Savings £££

These savings are automatically applied to your basket

Buy Price Save
> 9 items £13.78 5%
> 49 items £13.04 10%

Based on your bulb selction today:

SAVE £700.80 per year*

on your lighting bill

*Based on 8 hours use per day and 10 lights
  • RRP
    £24.99
    Lumens
    900
    IP Rating
    IP65
    Type
    3528 SMD
    Average Life
    45,000 Hours
    CE / ROHS
    RoHS, CE
    Dimensions
    8mm*2500mm
    Wattage
    12W
    Dimmable
    YES
    Equivalent To
    50W
    Beam angle
    180°
    AKA
    LED Ribbon Lights | Kitchen Cabinet Strip Lights
  • Product Description

    These high quality ultra-bright waterproof 3528 LED strip lights are great for indoor use at either home, in the office or at work. This version provides greater protection as the LEDs are sealed and set into a waterproof epoxy resin, rated at IP65 and 3M self-adhesive backing for easy installation. LED strip lights offer the highest intensity, brightness and even distribution of light. They feature 60 LED lights per meter, totaling 150 LEDs per 2.5 meter roll.

    LED strips illuminate instantly and produce a bright continuous light housed in an slim (8 mm) waterproof flexible design that come in a range of sizes and colours to suit most applications. LED lighting strip in its essence, is a continuous row of LEDs that have been soldered together with resistors to form a circuit. LEDs are low voltage and require a 12 volt DC power supply.

    Ideal for: sign lighting, cupboard and cabinet lighting, edge lighting for steps, door frames, shelf lighting, edge lighting, lighting for under kitchen cabinets and cupboards. The list is endless so get creative.

    The intensity of the light is dependent upon the quantity and length of LEDs. The number of LEDs vary from 60 LEDs per meter to 120 LEDs per meter and there are two sizes, SMD3528 and SMD5050. The SMD3528 are 3.5mm x 2.8mm in dimension and consume 0.08 watts per chip; whereas the SMD5050 are 5mm x 5mm and consume 0.24 watts per chip which is 3 times brighter.

    You will require: one 12 watt power supply for a single strip or if using two strips a 24 watt power supply is required. You also have the option of cutting the strip at least once without having to make new connections. All static LED strip lights must not exceed 15 metres (6 x 2.5m rolls) in length. Basic installations can be done in a matter of minutes as the strips can be stuck directly using the 3M self-adhesive backing. Plug the power supply straight into a standard wall socket and the job is done.

     


     

    Recommendation: The 60 SMD Power 3528 LED strip light is best for decor and mood lighting, and can be used for promotional designs, illuminating letters, stucco's or hide them behind mouldings or edges of furniture. It operates at 12V DC and can be used with either a mains power supply or battery operated. (coming soon)

     

    This table shows the maximum lengths that can be achieved using different SMD sizes against which mains power supply to order when purchasing:

    SMDLengthSMD/pmAmps12 watt / 1A24 watt / 2A72 watt / 6A35282.5 m60 SMD1 Amp1 Strip / 2.5 m2 Strips / 5.0 m3-6 Strips / 15.0 m (max.)35282.5 m120 SMD2 Amp—1 Strip / 2.5 m2-3 Strips / 7.5 m (max.)50502.5 m60 SMD3 Amp—1 Strip / 2.5 m2-3 Strips / 7.5 m (max.)

     

     


     

    Can I Cut my LED Strip Lights?  While it is possible to get your lights cut by a professional, the process is so simple that you can also do it yourself. If, for example, you find that your strip lights is slightly too long for the area in which you plan to install it, you can chop a section off the end to make it fit. Alternatively, if you have a large, single strip of LEDs, but you would prefer two separate pieces, you can cut the strip in half.

    LED Strip Lights can be cut at 5 or 10 cm intervals, depending on the type of strip light purchased. The "cutting points" are clearly marked with a straight line. To separate your strip lights, cut along the line using a pair of scissors or craft knife. Always make sure the tool you are using is sharp, as a blunt tool could potentially cause damage to the circuit board and components.

    Due to their design, LED Strip Lights will continue to work even after they have been cut. This is because their circuit is completely closed at each cutting point. If you are removing a section from the end of your strip light, always make sure you are cutting it at the end away from the connector.

    If you are cutting you strip lights into two parts and plan to use them as two separate installations, you will also have to do a bit of soldering. At each cutting point there should be a series of solder points (circular metal discs), 2 in the case of single colour lights and 4 in the case of colour changing RGB. To attach a new length of 2 core or 4 core cable, you will need to solder the wires to their corresponding solder points (which should be clearly marked for this purpose).

    Soldering isn't a difficult task, but obviously requires the requisite tools, which most people don't own. Asking an electrician to do the soldering on your behalf will also work out to be fairly expensive as you are of course paying for their time.

     


     

    Strip lights can also be powered through a transformer instead of a compatible power supply; both of which we supply. With an RGB strip, a controller (sold separately) is also required to be installed.


     

    Episode 1 from our 'How To' series demonstrates how easily our single colour LED Strip Lights can be installed...

  • Additional Information

    LightRabbit® is a trusted brand; we invest extensively to ensure the highest possible quality control standards whilst also sourcing the latest LED technology available. We pride ourselves on quality and innovation, offering an extensive 5-year warranty and 45-day no quibble - money back guarantee on all our products to ensure you the customer are 100% satisfied with your final purchase.

    These LED strip lights are a highly versatile solution for any application where you are wanting to create an ambiance or mood using LED lights. Your new LED strip lights are incredibly easy to install and come with sticky 3M backing making fitting a breeze. As with all LED products you will continue to make the same massive savings off current energy bills over the expected 45,000 hours lifespan of the strip.


    • Benefit from our bulk buy and save options. If you have any support questions please call our committed customer services team on 0800 080 3201 or alternatively we can assist you using our Live Chat service.



    WE OPERATE A 2-5 WORKING-DAY DELIVERY SERVICE TO THE UK & IRELAND
    AND PROVIDE TRACKING NUMBERS WITH ALL HIGH-VALUED ORDERS...


Your Review

LED Strip – 60 x 3528 SMD LED Chips Per Metre - Silicone Waterproof – 2.5m Roll

* required fields

  • 01534 629460
  • Light Rabbit Limited
    10 The Parade,
    St Helier, JE2 3QP

Request a Price Match on this Product

Product Details




Your Details

Customers who bought this item also bought

I have a camper van which runs a 12v supply, can I wire these led strips directly into the fuse box without using a transformer or adaptor ?

Hello. These lights take 12vdc so as long as you input 12v dc they will work fine. Thank you.

What connector is required for the power connection.

Hello, if you are using a plug in power adaptor the strip will connect directly to it and if you are using a wire in transformer you will need to splice the wires and attach them together. Thank you,

 Back to top

Price Match



* Required Fields