60 SMD Glass Covered - 4.5 Watt E27 LED Bulb

60 SMD Glass Covered - 4.5 Watt E27 LED Bulb 4.7 3
  • Replaces
  • 40W
90% energy saving
30 year lifespan
5 Year Warranty

60 SMD Glass Covered - 4.5 Watt E27 LED Bulb

SKU: E27/60SMD
  • 40W Watt replacement
  • Dimmable
  • Wide Beam Angle
60 SMD Glass Covered - 4.5 Watt E27 LED Bulb 4.7 3 Print as PDF
£ 6.16 inc. VAT £5.13 ex. VAT
Light colour Dimmable Price Quantity Stock
Cool White Dimmable
In stock 18
Yes £6.16 - + In stock 18
Warm White Dimmable
In stock 451
Yes £6.16 - + In stock 451
Please enter quantity.
Quantity value must be numberic.
Buy Pay Save
> 9 items £5.84 5%
> 49 items £5.54 10%
380 Lm 40W replace Yes Dimmable 4.5W 120°
Result
Lux at ground level:  
 
  •  

    This E27 LED bulb features 60 individual high quality 5050 SMD LEDs that emit a light output of 380Lm. They're intelligently designed to considerably reduce energy consumption by up to 90% and are available in both Warm and Cool white options. When ordering these particular lamps you will see they are only available in a dimmable option. This means they are fully compatible with both dimmable and non-dimmable applications. Using only 4.5 watts of power these are by far our most energy efficient bulbs available and equivalent in brightness to a 40 watt bulb.

    These E27 bulbs feature a massive 120-degree beam angle; designed to output the widest beam angle available of any SMD bulb on the market today. These bulbs will install into any Edison Screw (ES) socket with an input voltage of 240V and is designed for any domestic, commercial or retail installations. They use only 10% of the energy when compared to the older style bulbs, thereby offering significant savings that consumers simply cannot ignore.

    Lasting 50,000 hours compared to a halogen lamp which last 2000 hours, LED bulbs usually pay for themselves within six months of installation. Homeowners and businesses can now go years without the hassle of having to change bulbs. These LED equivalents feature shock and vibration resistant technology, there is no filament to ever burnout so they run considerably cooler than standard filament bulbs.



    Main Features:

    •  60 individual high quality SMD chips, 120 degree beam angle
    •  Cost Effective Energy Savings within 6 months of installation
    •  Spiral alloy housing - great for dispersing heat
    •  30-year Average Lifespan (6-year Lifespan when left on 24/7)
    •  Consume 10% of the energy used by traditional light bulbs
    •  No start-up delay or flickering, normal brightness when electrified
    •  LED bulbs do not contain a filament that can easily be damaged
    •  Environmentally Friendly - LED bulbs contain no Glass or Mercury.



    PLEASE NOTE: Dimming LED Lamps?

    Non-dimmable LED lamps cannot be dimmed. Should you fit a dimmer to non-dimmable LED’s then damage to the dimmer, lamps or both will occur.

    Mains voltage dimmable LED light bulbs can be dimmed using an ordinary resistive dimmer. LED lamps are an attractive proposition as they consume very low wattage's and are very energy efficient. This can cause problems when choosing the correct dimmer.

    If you have a few LED lamps to dim, then the total wattage will not be enough to load the dimmer. For example, four 5w LED lamps in a small room will only total 20w whilst the minimum load on a 250w dimmer is 25w. This means that the dimmer will simply not work. In these circumstances a low load dimmer rated at 5 – 50w would be required.

    Under normal circumstances, so long as the minimum load is exceeded, dimming mains voltage LED lamps is not an issue so long as the minimum load is observed.

    Dimming low voltage LED lamps is also easily achieved by either dimming the driver on the primary (mains) side or on the secondary (low voltage) side. Of the two, primary side dimming is the more desirable and the easiest to achieve. The LED driver would need to be of a constant current type and dimmable.

    Dimming most domestic light fittings is relatively simple but you must ensure that you select the correct dimming module for the task. We supply all available types of dimmers in every finish available to match your existing switches and sockets. Should you wish to purchase a dimmer together with your lamps we are more than happy to advise you and assist in its selection to ensure that you get it right first time!

  • Lumens
    380
  • Light Colour
    Cool White / Warm White
  • Type
    60x SMD3528
  • Base
    E27
  • Average Life
    50,000 Hours
  • Equivalent To
    40W
  • Input Voltage
    AC110~240V
  • CE / ROHS
    YES
  • Dimmable
    YES
  • Dimensions
    Ø50x57mm
  • Wattage
    4.5W
  • Beam angle
    120°

Your rating? *

Price
90% energy saving
30 year lifespan
5 Year Warranty

Subscribe to our news

Please fill the field before continuing

Subscribe to our LED newsletter to receive all the latest news, be the first to learn about new products and benefit from exclusive discounts and LED promotions.