36 SMD Glass Covered - 6.5 Watt GU10 LED Bulb

36 SMD Glass Covered - 6.5 Watt GU10 LED Bulb 4.8 41
  • Replaces
  • 60W
90% energy saving
30 year lifespan
5 Year Warranty

36 SMD Glass Covered - 6.5 Watt GU10 LED Bulb

SKU: GU10/36SMD
  • 60W Watt replacement
  • Dimmable
  • Wide Beam Angle
36 SMD Glass Covered - 6.5 Watt GU10 LED Bulb 4.8 41 Print as PDF
£ 10.00 inc. VAT £8.33 ex. VAT
Light colour Dimmable Price Quantity Stock
Cool White
In stock 887
No £10.00 - + In stock 887
Warm White
In stock 1000pc+
No £10.00 - + In stock 1000pc+
Please enter quantity.
Quantity value must be numberic.
Buy Pay Save
> 9 items £9.49 5%
> 49 items £8.99 10%
480 Lm 60W replace Yes Dimmable 6.5W 120°
Result
Lux at ground level:  
 
  •  

    Our Glass Covered LED bulb features 36 individual high quality 2835 SMD LEDs that emit a light output of 480 lumen for warm and 550 lumen for the cool white version. They're intelligently designed to considerably reduce energy consumption by up to 90% and are available in both Cool white and Warm white options, compatible with both dimmable and non-dimmable applications. Using only 6.5 watts of power these energy efficient bulbs compare in brightness to a 60-70 watt bulb yet consume significantly less electricity.

    This Glass Covered SMD GU10 bulb features a massive 120-degree beam angle; designed to output the widest beam angle available of any SMD bulb on the market today. This bulb will install into any GU10 socket with an input voltage AC175-265V and is designed for any domestic, commercial or retail installations. Using only 10% of the energy when compared to the older style bulbs, thereby offering significant savings that consumers simply cannot ignore in the long run.

    Offering the latest heat-sink design, this helps to disperse any unwanted heat from the LEDs which protects the overall lifespan of the chips.

    Lasting 45,000 hours compared to a halogen lamp which last 2000 hours, these bulbs pay for themselves within six months of installation. Homeowners and businesses can now go years without the hassle of having to change bulbs. These LED equivalents feature shock and vibration resistant technology, there is no filament to ever burnout or break-in, so they run considerably cooler than standard filament bulbs.

    Recent advances in LEDs, household electrical consumption from lighting products is being greatly reduced when using low-energy LED lighting. The Glass Covered GU10 LED bulb offers consumers a cost effective SMD light bulb with all the benefits and limited drawbacks.

     

    Main Features:

    •  Features 36 individual high quality 2835 SMD LEDs, 120 degree beam angle<br > •  Environmentally Friendly - LED bulbs contain no Glass or Mercury
    •  No start-up delay or flickering, normal brightness when electrified
    •  LED bulbs do not contain a filament that can easily be damaged
    •  Cost Effective Energy Savings within 6 months of installation
    •  30-year Average Lifespan (6-year Lifespan when left on 24/7)<br > •  Consume 10% of the energy used by traditional light bulbs



    PLEASE NOTE: Dimming LED Lamps?

    Non-dimmable LED lamps cannot be dimmed. Should you fit a dimmer to non-dimmable LED’s then damage to the dimmer, lamps or both will occur.

    Mains voltage dimmable LED light bulbs can be dimmed using an ordinary resistive dimmer. LED lamps are an attractive proposition as they consume very low wattage's and are very energy efficient. This can cause problems when choosing the correct dimmer.

    If you have a few LED lamps to dim, then the total wattage will not be enough to load the dimmer. For example, four 5w LED lamps in a small room will only total 20w whilst the minimum load on a 250w dimmer is 25w. This means that the dimmer will simply not work. In these circumstances a low load dimmer rated at 5 – 50w would be required.

    Under normal circumstances, so long as the minimum load is exceeded, dimming mains voltage LED lamps is not an issue so long as the minimum load is observed.

    Dimming low voltage LED lamps is also easily achieved by either dimming the driver on the primary (mains) side or on the secondary (low voltage) side. Of the two, primary side dimming is the more desirable and the easiest to achieve. The LED driver would need to be of a constant current type and dimmable.

    Dimming most domestic light fittings is relatively simple but you must ensure that you select the correct dimming module for the task. We supply all available types of dimmers in every finish available to match your existing switches and sockets. Should you wish to purchase a dimmer together with your lamps we are more than happy to advise you and assist in its selection to ensure that you get it right first time!


    Click below to see the benefits of LED lighting...

        

  • Lumens
    480
  • Light Colour
    Cool White / Warm White
  • Type
    36x SMD2835
  • Base
    GU10 - twist & lock
  • Average Life
    50,000 Hours
  • Equivalent To
    60W
  • Input Voltage
    AC175-265V
  • CE / ROHS
    YES
  • Dimmable
    YES
  • Dimensions
    ∅50x75mm
  • Wattage
    6.5W
  • Beam angle
    120°
Lovely bright blue/white light. Great for my wife's workroom where she needs good fabric colour rendering.
Used the lamps in my shop. They will pay for themselves in just 4 months!

Your rating? *

Price
90% energy saving
30 year lifespan
5 Year Warranty

Subscribe to our news

Please fill the field before continuing

Subscribe to our LED newsletter to receive all the latest news, be the first to learn about new products and benefit from exclusive discounts and LED promotions.