24 SMD Glass Covered - 5 Watt E27 LED Bulb

24 SMD Glass Covered - 5 Watt E27 LED Bulb 4.7 7
  • Replaces
  • 50W
90% energy saving
30 year lifespan
5 Year Warranty

24 SMD Glass Covered - 5 Watt E27 LED Bulb

SKU: GCSE27/24D
  • 50W Watt replacement
  • Dimmable
  • Wide Beam Angle
24 SMD Glass Covered - 5 Watt E27 LED Bulb 4.7 7 Print as PDF
£ 6.99 inc. VAT £5.83 ex. VAT
Light colour Dimmable Price Quantity Stock
Cool White Dimmable
In stock 23
Yes £6.99 - + In stock 23
Warm White Dimmable
In stock 181
Yes £6.99 - + In stock 181
Please enter quantity.
Quantity value must be numberic.
Buy Pay Save
> 9 items £6.64 5%
> 49 items £6.29 10%
380lm Lm 50W replace Yes Dimmable 5W 120°
Result
Lux at ground level:  
 
  •  

    Our Glass Covered LED bulb features 24 individual high quality 5050 SMD LEDs that emit a light output of 380 lumens. They're intelligently designed to considerably reduce energy consumption by up to 90% and are available in both Cool white and Warm white options,as well as being compatible with both dimmable and non-dimmable applications. Using only 5 watts of power these energy efficient bulbs compare in brightness to a 50 watt bulb yet consume significantly less electricity.

    This Glass Covered SMD E27 bulb features a massive 120° beam angle; designed to output the widest beam angle available of any SMD bulb on the market today. This bulb will install into any Edison Screw (ES) socket with an input voltage AC175-265V and is designed for any domestic, commercial or retail installations. Using only 10% of the energy when compared to the older style bulbs, thereby offering significant savings that consumers simply cannot ignore in the long run.

    Offering the latest heat-sink design, this helps to disperse any unwanted heat from the LEDs which protects the overall lifespan of the chips.

    Lasting 50,000 hours compared to a halogen lamp which lasts just 2000 hours, these bulbs will effectively pay for themselves within six months of installation. Homeowners and businesses can now go years without the hassle of having to change bulbs. These LED equivalents feature shock and vibration resistant technology, there is no filament to ever burnout or break-in, so they run considerably cooler than standard filament bulbs.

    Recent advances in LEDs, household electrical consumption from lighting products is being greatly reduced when using low-energy LED lighting. The Glass Covered E27 LED bulb offers consumers a cost effective SMD light bulb with all the benefits and limited drawbacks.

     

    Main Features:

    •  Features 24 individual high quality 5050 SMD LEDs, 120 degree beam angle<br > •  Environmentally Friendly - LED bulbs contain no Glass or Mercury
    •  No start-up delay or flickering, normal brightness when electrified
    •  LED bulbs do not contain a filament that can easily be damaged
    •  Cost Effective Energy Savings within 6 months of installation
    •  30-year Average Lifespan (6-year Lifespan when left on 24/7)<br > •  Consume 10% of the energy used by traditional light bulbs



    PLEASE NOTE: Dimming LED Lamps?

    Non-dimmable LED lamps cannot be dimmed. Should you fit a dimmer to non-dimmable LED’s then damage to the dimmer, lamps or both will occur.

    Mains voltage dimmable LED light bulbs can be dimmed using an ordinary resistive dimmer. LED lamps are an attractive proposition as they consume very low wattage's and are very energy efficient. This can cause problems when choosing the correct dimmer.

    If you have a few LED lamps to dim, then the total wattage will not be enough to load the dimmer. For example, four 5w LED lamps in a small room will only total 20w whilst the minimum load on a 250w dimmer is 25w. This means that the dimmer will simply not work. In these circumstances a low load dimmer rated at 5 – 50w would be required.

    Under normal circumstances, so long as the minimum load is exceeded, dimming mains voltage LED lamps is not an issue so long as the minimum load is observed.

    Dimming low voltage LED lamps is also easily achieved by either dimming the driver on the primary (mains) side or on the secondary (low voltage) side. Of the two, primary side dimming is the more desirable and the easiest to achieve. The LED driver would need to be of a constant current type and dimmable.

    Dimming most domestic light fittings is relatively simple but you must ensure that you select the correct dimming module for the task. We supply all available types of dimmers in every finish available to match your existing switches and sockets. Should you wish to purchase a dimmer together with your lamps we are more than happy to advise you and assist in its selection to ensure that you get it right first time!

     

  • Lumens
    380lm
  • Light Colour
    Cool White / Warm White
  • Type
    SMD LED
  • Base
    E27
  • Average Life
    50,000 Hours
  • Equivalent To
    50W
  • Input Voltage
    AC 175-265V
  • CE / ROHS
    YES
  • Dimmable
    YES
  • Dimensions
    Ø50*77mm
  • Wattage
    5W
  • Beam angle
    120°
  • Diameter
    50mm

Your rating? *

Price
90% energy saving
30 year lifespan
5 Year Warranty

Subscribe to our news

Please fill the field before continuing

Subscribe to our LED newsletter to receive all the latest news, be the first to learn about new products and benefit from exclusive discounts and LED promotions.