Recommended Retail Price. This is the retail price recommended by manufacturers for sale of their products.
is the SI derived unit (symbol: lm) of luminous flux, a measure of the total "amount" of visible light emitted by a source.
Usually described as Warm White, Natural White, Cool White or stated in Kelvin.
The type of chip used to produce light.
Indicates the shape or form of the base usually using the width between pins or the diameter of the cap.
Average LED lifespan in hours.
Light you would expect to obtain from the equivalent traditional bulb or lamp.
The power voltage supplied to the LED bulb usually 240v for mains or 12v with a transformer.
Meets certification requirements.
Can be used with an LED compatible dimmer switch.
LED bulb measurements.
The amount of power consumed (in Watts).
Light beam angle in degrees. Defines how wide the light is spread.
25° Spotlight | Downlight | Halogen | Recessed Ceiling
With traditional bulbs, often a lot of the light is hidden inside the unit. True to its name the Reflector mirrors all of the light out into the room.
The large reflector behind the LED bulb means that no light is lost at the back of the unit making it much more efficient running at just 5w it also used a lot less power with the brightness similar to that of a 50w incandescent bulb. This LED bulb is available in cool and warm white options.
PLEASE NOTE: Dimming LED Lamps?
Non-dimmable LED lamps cannot be dimmed. Should you fit a dimmer to non-dimmable LED’s then damage to the dimmer, lamps or both will occur.
Mains voltage dimmable LED light bulbs can be dimmed using an ordinary resistive dimmer. LED lamps are an attractive proposition as they consume very low wattage's and are very energy efficient. This can cause problems when choosing the correct dimmer.
If you have a few LED lamps to dim, then the total wattage will not be enough to load the dimmer. For example, four 5w LED lamps in a small room will only total 20w whilst the minimum load on a 250w dimmer is 25w. This means that the dimmer will simply not work. In these circumstances a low load dimmer rated at 5 – 50w would be required.
Under normal circumstances, so long as the minimum load is exceeded, dimming mains voltage LED lamps is not an issue so long as the minimum load is observed.
Dimming low voltage LED lamps is also easily achieved by either dimming the driver on the primary (mains) side or on the secondary (low voltage) side. Of the two, primary side dimming is the more desirable and the easiest to achieve. The LED driver would need to be of a constant current type and dimmable.
Dimming most domestic light fittings is relatively simple but you must ensure that you select the correct dimming module for the task. We supply all available types of dimmers in every finish available to match your existing switches and sockets. Should you wish to purchase a dimmer together with your lamps we are more than happy to advise you and assist in its selection to ensure that you get it right first time!
Click below to see the benefits of LED lighting...
LightRabbit® is a trusted brand; we invest extensively to ensure the highest possible quality control standards whilst also sourcing the latest LED technology available. We pride ourselves on quality and innovation, offering an extensive 5-year warranty and 28-day no quibble - money back guarantee on all our bulbs to ensure you are 100% satisfied with your purchase.
These standard sized LED bulbs are a direct replacement for your existing GU10 lamps. For a one-off investment you could recover the cost of your order within six months of installing your new bulbs. After recovering your initial investment, every six months thereafter you will continue to make the same massive savings off current energy bills over the expected 50,000 hours life of the lamp.
• These dimmable GU10 bulbs are unlikely to adequately work when used with a conventional "Leading Edge" dimmer switch. Instead it is highly recommended that you change any existing fittings for a dedicated "Trailing Edge dimmer" which offers soft start, smooth control and silent running.
• Changing your existing lamps to LED will save you money in the long-run whilst also reducing your overall carbon footprint - Help Save the Planet!
• Benefit from our bulk buy and save options. If you have any support questions please call our committed customer services team on 01534 629460 or alternatively using our Live Chat service.
WE OPERATE A 2-5 WORKING-DAY DELIVERY SERVICE TO THE UK & IRELAND AND PROVIDE TRACKING NUMBERS WITH ALL HIGH-VALUED ORDERS...
You may also be interested in the following product(s)
True Retro Fit - 4.6 Watt GU10 LED Bulb (50W Equivalent)
Our Price £10.60
20 SMD Glass Covered - 4.5 Watt MR16 LED Bulb (50W Equi...
Our Price £8.80
Trimax - MR16 LED Bulb 3watt, 270 Lumens
Our Price £5.99