Recommended Retail Price. This is the retail price recommended by manufacturers for sale of their products.
is the SI derived unit (symbol: lm) of luminous flux, a measure of the total "amount" of visible light emitted by a source.
Usually described as Warm White, Natural White, Cool White or stated in Kelvin.
Cool White / Warm White
The type of chip used to produce light.
Indicates the shape or form of the base usually using the width between pins or the diameter of the cap.
Average LED lifespan in hours.
Light you would expect to obtain from the equivalent traditional bulb or lamp.
The power voltage supplied to the LED bulb usually 240v for mains or 12v with a transformer.
Meets certification requirements.
Can be used with an LED compatible dimmer switch.
LED bulb measurements.
The amount of power consumed (in Watts).
Light beam angle in degrees. Defines how wide the light is spread.
45° Spotlight | Downlight | Halogen | Recessed Ceiling
Light Rabbit proudly presents another unique design in LED retro fit lamps.
This design is not only for looks but also offers the best in performance you will get for a lamp of its kind in this price range. With the most recent thermal technology, reflectors and running at 5 watts, available in cool or warm white this gives you all the benefits you would expect from an LED light source whilst being capable of offering you savings year on year with your electricity bills.
3 Great Things about LED GU10 Peardrop SMD LED Bulb
With the hype of renewable and clean technologies, green is indeed "IN." In other words, what this means is that green or eco-friendly products are more in-demand. This is also because people are looking for better cost effective options on their domestic and business overheads. One saving that can easily be made is with the use of retro fit LED lighting, and the LED GU10 Peardrop SMD bulb addresses this.
This product is in fact at the forefront of modern LED lighting. It is general knowledge that LEDs are able to produce light more efficiently and in an environment-friendly manner. Hence, people need to know the three (3) greatest things about this. The following sections describe these:
It is Effective and Superior
First and foremost, among the best things about this LED GU10 Peardrop SMD bulb is the fact that it can produce superior light effectively. This is not just a claim. It is in fact, based on science. This is because it is remarkable that this product can produce lighting, which is as bright as 450 Lumens. It is equivalent to what an ordinary 50 watt bulb can produce. The actual light quality is also better as the LED bulbs come in warm white and cool white variants. Cool white is better for working conditions and areas of the home where a natural light is preferred such as the kitchen or hallways. Warm White is more like a traditional halogen and give a warm glow which is preferable for dining and living rooms.
It is a Cost-efficient Investment
Aside from producing superior lighting quality, it is also highly cost efficient. This is because it has it is only 5 watts. In other words, while it can produce lighting that is as bright as an ordinary 50W halogen bulb, it does not use a lot of electricity – in fact only 10%. In this regard, if there is less electricity consumed in a household, the monthly electricity bill that will also be lower.
Built to Last
Thirdly, and not the least, the LED GU10 Peardrop SMD bulb is also built to last. This is because it is highly durable with an average life of 50,000 hours and a protective outer skin which is why it the aluminum casing is black. These LED bulbs are both more durable when handling and will last up to 30 years with normal domestic use.
PLEASE NOTE: Dimming LED Lamps?
Non-dimmable LED lamps cannot be dimmed. Should you fit a dimmer to non-dimmable LED’s then damage to the dimmer, lamps or both will occur.
Mains voltage dimmable LED light bulbs can be dimmed using an ordinary resistive dimmer. LED lamps are an attractive proposition as they consume very low wattage's and are very energy efficient. This can cause problems when choosing the correct dimmer.
If you have a few LED lamps to dim, then the total wattage will not be enough to load the dimmer. For example, four 5w LED lamps in a small room will only total 20w whilst the minimum load on a 250w dimmer is 25w. This means that the dimmer will simply not work. In these circumstances a low load dimmer rated at 5 – 50w would be required.
Under normal circumstances, so long as the minimum load is exceeded, dimming mains voltage LED lamps is not an issue so long as the minimum load is observed.
Dimming low voltage LED lamps is also easily achieved by either dimming the driver on the primary (mains) side or on the secondary (low voltage) side. Of the two, primary side dimming is the more desirable and the easiest to achieve. The LED driver would need to be of a constant current type and dimmable.
Dimming most domestic light fittings is relatively simple but you must ensure that you select the correct dimming module for the task. We supply all available types of dimmers in every finish available to match your existing switches and sockets. Should you wish to purchase a dimmer together with your lamps we are more than happy to advise you and assist in its selection to ensure that you get it right first time!
Click below to see the benefits of LED lighting...
LightRabbit® is a trusted brand; we invest extensively to ensure the highest possible quality control standards whilst also sourcing the latest LED technology available. We pride ourselves on quality and innovation, offering an extensive 5-year warranty and 28-day no quibble - money back guarantee on all our bulbs to ensure you are 100% satisfied with your purchase.
These standard sized LED bulbs are a direct replacement for your existing GU10 lamps. For a one-off investment you could recover the cost of your order within six months of installing your new bulbs. After recovering your initial investment, every six months thereafter you will continue to make the same massive savings off current energy bills over the expected 50,000 hours life of the lamp.
• When ordering these particular lamps are ONLY available in a dimmable option. This means they are fully compatible with both dimmable and non-dimmable applications. If you are unsure about what type of bulbs you require please do contact us.
• These dimmable GU10 bulbs are unlikely to adequately work when used with a conventional "Leading Edge" dimmer switch. Instead it is highly recommended that you change any existing fittings for a dedicated "Trailing Edge dimmer" which offers soft start, smooth control and silent running.
• Changing your existing lamps to LED will save you money in the long-run whilst also reducing your overall carbon footprint - Help Save the Planet!
• Benefit from our bulk buy and save options. If you have any support questions please call our committed customer services team on 01534 629460 or alternatively using our Live Chat service.
WE OPERATE A 2-5 WORKING-DAY DELIVERY SERVICE TO THE UK & IRELAND AND PROVIDE TRACKING NUMBERS WITH ALL HIGH-VALUED ORDERS...
You may also be interested in the following product(s)
True Retro Fit - 4.6 Watt GU10 LED Bulb (50W Equivalent)
Our Price £10.60
10 x Reflector Plus - 5.4 Watt GU10 LED Bulbs (50W Equi...
Our Price £88.60
60 SMD Glass Covered - 4.5 Watt GU10 LED Bulb (50W Equi...
Our Price £7.40